Jura ThermoBlock Temperature Sensor
- Item #: 0010589
Jura ThermoBlock Temperature Sensor. One end with circular loop ring that is screwed on to the thermoblock, the other end with two male pins/connectors that snaps into the female connector. The female connector is connected to the electronic board.
End to End length: 170mm
Please review the picture above before ordering this item. NON-RETURNABLE item.
Typically needs replacement when Jura machine displays ERROR 1 indicating that thermoblocking is not heating up. It is likely that either thermoblock temperature sensor or thermoblock itself needs to be replaced. Check the continuity on the thermoblock and thermal fuses before ordering this item.
Jura Impressa C-Series
C5 - C9 - Capresso C3000
Jura Impressa E-Series
E8 - E9 - E10 - E20 - E25 - E80 - E85
Jura Impressa F-Serie
F5 - F7 - F9 - F50 - F70 - F90 - XF50 - XF70
Jura Impressa J-Serie
J5 - J6 - J7 - J9
Jura Impressa S-Serie
S7 - S8 - S9 - S9 One Touch - S9 Cappuccino - S55 - S70 - S75 - S85 - S90 - S95
Jura Impressa X-Serie
X5 - X7 - X9 - X70 - X90 - X95 - XS90 One Touch - XS95 One Touch
Jura Impressa Z-Serie
Z5 - Z6 - Z7
N9 - N90
Please compare the old part with the display picture and make sure it matches exactly.